Timeguard - NTT01 TIMER SWITCH, INTERMATIC TIMER SWITCH, 24 HOUR, 96 SEGMENTS 48 ON/OFF, 15 MINUTE MIN, SINGLE CHANNEL, COMPACT, HEATING, IMMERSION, GENERAL USE

Timer Switch, 24 Hour, 96 Segments -48 ON/OFF

This versatile 24 hour compact timer switch, (also known as an intermatic timer switch) features 96 quick-set segments with up to 48 ON/48 OFF programmes per 24 Hours. Highly visible red LED ‘Mains On’ and green LED ‘Output’ indicators keep the user informed of the timer switch's status.  An easy to use traffic light slide switch for ON (green), auto (green & red) and OFF (red) mode indication is mounted on the front face.

This general purpose 24 hour intermatic time switch has been designed to switch ON and OFF at user selectable preset times via the easy to use captive segment dial, with permanent ON/OFF control. This time switch is rated at 230 VAC, with a switch rating of 16 Amps resistive load and 6 Amps inductive.

Supplied with mounting hardware - Rawl plugs and screws. Cable entry is via the rear of the unit. This capable switching timer is suitable for a wide range of applications, including localised heating and immersion water heater control and general switching tasks. Designed to fit a standard flush or surface mount box of a minimum 32mm.

Time Switch Features

• Operating Voltage 230V AC
• 24 hour timer program mode
• Switch rating 16 A resistive, 6 A inductive
• Shortest switching time 15 minutes
• Permanently on facility (via slide switch)
• 96 segments (48 On, 48 Off)
• Single channel
• Frequency 50Hz
• Earth Class Rating Class II
• Operating Temperature 0°C to 40°C
• Mounting Hole Centres 60 mm
• Standby Consumption <1.43W
• Polycarbonate construction
• Comes with Rawl plugs and screws
• Cable capacity 1.5 – 2.5 mm2 Flexible cable
• Dimensions HxWxD  92 x 92 x 60mm

What is a Timer Switch?

A 24 hour mechanical timer switch (also known as an intermatic switch) is an analogue timer that uses physical components such as levers or pins and gears for programming time intervals which are adjusted manually to change the time that electrical power is turned ON or OFF.  

What are the benefits of a Mechanical Timer Switch?

The main benefit of a mechanical timer is that they are simple to install and operate, providing reliable functionality, and provide value for money when compared to electronic and digital timer variants.

What is a Timer Switch used for?

A mechanical switch timers’ primary function is to eliminate the need for leaving electrical circuits and attached equipment active saving energy and money. Providing basic, but precise power switching functionality for a variety of uses. Timer switch applications are very diverse, including regulating HVAC, lighting and similar systems.