Siemens Burners - LGK16.322A27 GAS BURNER CONTROL, FOR STATIONARY AIR HEATERS, T1=35.5S, TSA=2S, AC230V

Gas and Oil Burner Control Unit

This Burner control is utilised for stationary air heaters and other continuously operating multistage or modulating oil or gas burners of medium to high capacity. With a T1 (prepurge time) of 35.5 seconds and TSA (safety time) of 2 seconds, this control unit ensures efficient and precise operation of the burner. This gas burner control has been tested to EN230:2005. Operating at 230 VAC, this burner controller is compatible with a wide range of heating systems. The high-quality construction of this gas burner control guarantees durability and long-lasting performance

This Burner Control Unit features a self-checking flame supervision circuit which initiates the required safety actions not only in the case of premature or missing flame signals but also in case of any kind of failure of the flame detector, the cables, or the flame signal amplifier that may simulate a flame signal during burner operation.

Reliable and dependable, this control unit is suitable for a wide range of applications including oil and gas fired combustion plants where the use of self-checking flame supervision system is mandatory, such as burners in continuous use, intermittent operation burners, burners in plants where, for safety requirements, burner supervision via self-checking is required.

Oil and Gas Fired Burner Control Unit Features

• Burner control for stationary air heaters
• Mains voltage 220- 240 VAC
• Flame supervision – detector QRA53…/QRA55…
• Tested to EN230:2005
• UV QRA53…./QRA55…  can be used together with Ionisation electrode
• Plug-in design, suits AGM17/AGM17.1 base types
• Exchangeable unit fuse
• Heat-resistant black plastic
• Lockout indication, warning lamp and reset button
• Dimensions HxWxD 103 x 103 x 108.5 mm